Logo Made in Germany

German Pavilion at Chinaplas 2017

16 – 19 May 2017 – Guangzhou, P. R. China

aboni GmbH

Booth number: Hall 5.1C11

We are specialized in manufacturing of instruments determining the residual water content in solids. With more than 20 years of experience in the field of moisture measurement. All specific components are internally developed and produced according our own designs by selected suppliers. The final assembly, initial calibration and commissioning of all products is made at our location in Schwielowsee, situated 30 km south-west of Berlin.

Moisture Analyzers:
HydroTracer FMX - for technical plastics

HydroTracer FLV - for technical plastics and very dry materials (< 50 ppm) and/or materials with low bulk density e.g. fibres, flakes or films

aboni GmbH
Friedrich-Ebert-Straße 27
14548 Schwielowsee
Germany

Phone: +49 70022 664366
E-mail: info@aboni.de
Internet: www.aboni.de

 

Baratti Engineering GmbH

Booth number: Hall 5.1T31

Baratti Engineering GmbH
Gewerbestr. 31
79618 Rheinfelden
Germany

Phone: +49 7623 71769-0
Fax: +49 7623 71769-58

E-mail: info@baratti-gmbh.de
Internet: www.baratti-gmbh.de

 

BOBOTEX Hans Ladwig GmbH & Co. KG

Booth number: Hall 5.1A23

BOBOTEX® manufactures and provides almost the entire range of roller coverings for the textile, foil and paper industry as well as the printing industry.90 Covering fabrics immediately available from stock.150 further materials to be produced and delivered at short notice.100% Service as well as customer-specific solutions.After all, innovating strength and creativity are the driving forces for our success.We are permanently engaged in the further development of products and materials as well as the testing of new processes and applications with our own research and development in our own laboratories and those of our partners.Tailored customer-specific solutions are created. Be it on the basis of different types of rubber such as NR, EPDM, Nitril, Silicone or even materials like PVC or polyurethanes (PU). Coverings made of rubber / cork for the foil / paper cutting and winding technology Silicone coverings for flexographic printing.



BOBOTEX® manufactures and provides almost the entire range of roller coverings for the textile, foil and paper industry as well as the printing industry.

coverings made of rubber / cork for the foil / paper cutting and winding technology
Silicone coverings for flexographic printing and Special pimpled rubber coverings for corrugated cardboard production

Currently we manufacture with:

  • Automatic vulcanisation machine / rotary vulcanising machine (Auma)
  • Vulcanisation press
  • Extrusion line
  • Embossing calender with embossing rolls of many different structures
  • Tenter frame
  • Weaving machines for our special fabrics

BOBOTEX Hans Ladwig GmbH & Co. KG
Spitzenstr. 35
42389 Wuppertal
Germany

Phone: +49 202 60707-0
Fax: +49 202 60707-29

E-mail: m.ech@bobotex.de
Internet: www.bobotex.de

 

Dr. Schenk GmbH

Booth number: Hall 5.1J29

Dr. Schenk offers ultra-fast, precise and reliable optical plastic inspection and measuring solutions for all kinds of base and converted plastic materials.

EasyInspect examines 100% of the material surface for local defects and EasyMeasure continuously monitors overall properties, such as coating uniformity or homogeneity and physical properties, such as opacity or reflectance.

Dr. Schenks solutions are used in multiple applications and markets, for example in battery film inspection, fuel cell inspection, blown film inspection, polarizing film inspection, PCB material inspection, release liner, label and tape inspection, OLED inspection, prepreg inspection, flexible packaging inspection, window film inspection and many other applications.

EasyInspect & EasyMeasure use Dr. Schenks unique MIDA Technology so one defect generates multiple images to deliver the most comprehensive material analysis on the market.

During Chinaplas 2017 Dr. Schenk will showcase EasyInspect and EasyMeasure. These ultra-fast, precise and reliable optical inspection solutions for web and sheet materials detect local defects and general material irregularities in films and foils.

From modular and standardized inspection units to highly customized systems, the Dr. Schenk project teams compile the EasyInspect package that suits your inspection requirements and tasks as well as QA budgets.

Dr. Schenk GmbH
Einsteinstr. 37
82152 Planegg
Germany

Phone: +49 89 85695-0
Fax: +49 89 85695-200

E-mail:
Internet: www.drschenk.com/products/plastic-inspection.html

 

Gulec Chemicals GmbH

Booth number: Hall 5.1J37

Gulec provides tailor-made, advanced flame retardant solutions for plastics, rubber, adhesives and other industries.

Our range of services includes the provision of technical advice, fire tests  and the supply of performance chemicals. It is our stated aim to support you in the further development of your products. We want to take progressive solutions to the consumer – for maximum environmental compatibility, health and safety.

Halogen-free flame retardants for PVC, PU, TPU, PE, PP, EVA, PET, PBT, PA, TPE, Rubbers, Elastomers, Acrylics, Epoxies, Silicones, Latex, UP, EPDM, Paper, Wood.

Technical support for design of flame retardant products.

Gulec Chemicals GmbH
Muggenhofer Str. 136
90429 Nürnberg
Germany

Phone: +49 911 2349310
Fax: +49 911 2349311

E-mail: info@gulec.de
Internet: www.gulec.de

 

Wirthwein AG

Booth number: Hall 5.1S51

For decades we have been the leading manufacturer of high-quality plastic components of any kind with production sites in Europe, Asia and the USA.

Moreover, the group of companies is doing business in the field of interior fittings with the two companies Bembé Parkett and Winkler Design.

With 21 companies and some 3,650 employees around the world the Wirthwein Group operates in the business units automotive, railway, electrical industry, home appliances, medical technology and interior fittings.

Wirthwein stands for owner-operation, independence and dynamic growth. Since 1949.

Wirthwein stands for: Almost 50 years of innovative plastics processing:

  • Thermoplastic injection molding of complex plastic parts with shot weights from 3 g to 10 kg
  • Processing of all standard thermoplastic materials
  • Machines with clamping forces from 150 to 16.000 kN
  • Capacity: 477 injection molding machines and 15 extrusion blow machines (worldwide)


Apart from innovative and efficient manufacturing technologies we offer a broad range of assembly processes, surface refinement technology and logistics services to our customers.

We manufacture molds used in the injection molding processes by ourselves.

Since 1969, we have been manufacturing molds and are able to exchange know-how and provide innovative solutions by means of our wealth of experience in the business fields of automotive, railway, electrical industy, home appliances and medical engineering.

Moldmaking completes our possibilities as a full-service supplier.

Wirthwein AG
Walter-Wirthwein-Str. 2-10
97933 Creglingen
Germany

Phone: +49 7933 702390
Fax: +49 7933 702910

E-mail: daniela.pfeuffer@wirthwein.de
Internet: www.wirthwein.cn

 

 

www.chinaplas.german-pavilion.com